8 Zones Repeater Panel for SIGMA Fire Detection Panel SIGMA CP-R E01080L2

E01080L2 - 8 Zones Repeater Panel for SIGMA CP Fire Detection Panel SIGMA CP-R Kentec

The Sigma CP-R Repeater is compatible with all Sigma CP Fire Detection panels which have operating software version V2.0 or above.
Repeaters are available with 2, 4 or 8 zones.
24V DC versions require an additional two cores for power either from the Fire Detection panel or from another 24V DC source.
A mixture of Repeaters, Ancillary boards or Sounder Boards up to a maximum of 7 of each type can be connected to a Fire Detection panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.

FEATURES & BENEFITS

- Two wire serial connection
- Up to 7 panels per system
- Full control over main panel
- Volt free fire and fault contact outputs

TECHNICAL SPECIFICATIONS

• Construction : 1.2 mm mild sheet steel
• Finish : Epoxy powder coated
• Colour - lid & box : BS 00 A 05 grey - fine texture
• Colour - controls plate & label : RAL 7047 light grey - satin
• Supply voltage (external) : 20-30 VDC
• Fault contact rating : 30 VDC 1A
• Fire contact rating : 30 VDC 1A
• Cable capacity : 2.5 mm© per terminal
• Operating temperature : -5°C to +50°C
• Operating humidity : < 95% (non condensing)
• Dimension : 385 mm x 310 mm x 60 mm
• Standby current 2 zones : 0,075 A
• Standby current 4 zones : 0,075 A
• Standby current 8 zones : 0,075 A
• Alarm current 2 zones : 0,094 A
• Alarm current 4 zones : 0,098 A
• Alarm current 8 zones : 0,110 A