UL-FM 4 zone Conventional Control Panel K1844
UL/FM 4 zone Conventional Fire Alarm Control Panel Sigma A-CP K1844 Kentec
K1844 - UL/FM 4 zone Conventional Fire Alarm Control Panel Sigma A-CP - Kentec
K1844-11 - 4 Conventional zones - Red cabinet
K1844-41 - 4 Conventional zones - Grey cabinet
K1854-11 - 4 Conventional zones with dialer - Red cabinet
K1854-41 - 4 Conventional zones with dialer - Grey cabinet
The Sigma A-CP range of conventional fire control panels with optional built in communicator are available with 2, 4 or 8 initiating circuits which may be extensively configured via a simple front panel operated programming method.
The low standby power requirements and cost effective small batteries allow the panel to be mounted in a small discrete enclosure which is available in standard red or optionally in an attractive grey colour.
A simple programming method using just 3 front panel buttons allows an extensive list of configuration options to be set and reviewed.
Single board construction which allows easy removal of all electronic parts by removing just 2 screws and ample provision of cable entry knockouts simplify installation.
4 Amp notification appliance power and built in selectable sync protocols provide ample power and control for a wide range of standard notification appliances.
The built in RS485 communications bus provides the facility to connect 4 wire annunciators or ancillary relay boards to provide further indication and control options throughout a premises.
The optional DACT allows dual line reporting to central stations and provides a 500 event history buffer.
FEATURES & BENEFITS
- UL864 approved
- Two, four or eight initiating circuits
- Initiating circuits individually configurable as Fire, Water flow or Supervisory
- Two 2A notification appliance circuits
- Selectable NAC sync protocols
- Two 2.0A notification appliance circuits
- 6.5A power supply
- Alarm verification selectable by zone
- Resettable Aux power output rated at 0.3A
- Aux power configurable to power off on Fire condition
- Fire, Trouble and Supervisory relays
- Single person walk test function
- Optional DACT
- Many advanced configuration options
- 72 hour standby with 7Ah batteries
- Compact enclosure
- Fire Drill capability
Recently Viewed
12 zones Esento Marine Fire Alarm Repeater Panel ESEN-R-12MAR
Esento Marine MED Approved 12 Way Fire Alarm Repeater Panel ESEN-R-12MAR - HAES
Styrene Gas Detector - Explosion Proof Enclosure Version S2155ST
Styrene Gas Detector, Vinyl benzene Gas Detector, Phenylethene Gas Detector 0-100% LFL 4-20mA - Catalytic sensor - SMART3G-C2 Sensitron Explosion Proof Enclosure version Zone 1 category 2 areas S2155ST
SF6 Gas Detector SMART3-R S4613SF6
SF6 Gas Detector, Sulfur hexafluoride Gas Detector 0-2000 ppm 4-20mA - Infrared sensor - SMART3-R for non classified area S4613SF6 Sensitron
PETROL VAPOURS Detector - Dust Proof Enclosure Version S2096VB
Petrol Vapours Detector 0-100% LFL 4-20mA - Catalytic sensor - SMART3G-C3 Sensitron Dust Proof Enclosure Version Zone 2 category 3 areas S2096VB
1.3MPX IP Outdoor IR Dome camera 2.8 to 12mm PAL TVD1103
1.3 MPX HD Network Outdoor IR Dome Camera, 2.8mm to 12 mm lens, PAL TVD-1103 - UTC Fire & Security
Fire sounder, 32 Tones user selectable, shallow base - AS363 UTC Fire & Security
Alarmline II Analogue LHD Cable w/ PVC Sheath & Stainless Steel Braid AASS-0500
Analogue Linear Heat Detection (LHD) cable with PVC Sheath & Stainless Steel Braid Alarmline II, 500m - AASS-0500 - ProReact F3005
EN54 Alarmline II Digital LHD Cable 88°C w/ PVC Sheath ADE88-0100
EN54 Digital Linear Heat Detection (LHD) cable 88°C with PVC Sheath Alarmline II, 100m - ADE88-0100
Digital Linear Heat Detection (LHD) cable 78°C (172°F) with PVC Sheath PROLINE - TH78
Digital Linear Heat Detection (LHD) cable 155°C (365°F) with Nylon coating PROLINE - TH185
English (UK)
Français (FR)



