Red MCP Indoor Call Point MCP3A-R000FF

MCP3A-R000FF - Red MCP Indoor Call Point - NO/NC Contact KAC

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range.
Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique 'plug and play' concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective with no re-termination required and no time wasted.
Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest 'flex-ability', the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.
Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard.
The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.

FEATURES & BENEFITS

- Unique 'Plug & Play' installation concept
- Total 'Flex-Ability' in the choice of operating element
- Anti-Tamper facility
- Enhanced aesthetics
- Fully approved to the latest standards
- Backward compatibility
- LPCB & VDS approvals

TECHNICAL SPECIFICATIONS

• Connection : NO/NC contacts 30VDC
• Voltage Max : 30VDC
• Current Rating (switch only) : 2 amps
• Cable Termination : 0.5 - 2.5 mm2
• Humidity : 0-95% non-condensing
• Operating Temperature : -40°C to +55°C
• Storage Temperature : -40°C to +55°C
• Ingress Protection (IP) Rating : IP24D
• Material : PC/ABS
• Weight : 110g Flush / 160g Surface
• Colour : Red, Ral 3001

-